RC Certified Inspections
(913) 764-7250
Olathe, Kansas
Mon-Fri 9AM-6PM, Sat 10AM-5PM
​
We respond to Voice Messages, Emails and Texts after hours
Contact Us
RC Certified Inspections
  • Home
  • Home & Commercial Inspections
    • Home/Residential Inspections
    • Commercial Bldg Inspections
    • New Home Pre-Drywall Inspection
    • Builder's Warranty Inspection
    • Pre-Listing Home Inspection
  • Specialized Inspections & Testing
    • Indoor Air Quality and Mold Testing Services
    • EIFS & Moisture Analysis
    • Stucco & Building Envelope Inspection
    • Water Intrusion Investigation
    • Thermal Infrared Camera Inspection
    • Mold Remediation Services
  • Our Inspectors
  • View Sample Reports
  • Schedule/Contact US NOW
  • Home
  • Home & Commercial Inspections
    • Home/Residential Inspections
    • Commercial Bldg Inspections
    • New Home Pre-Drywall Inspection
    • Builder's Warranty Inspection
    • Pre-Listing Home Inspection
  • Specialized Inspections & Testing
    • Indoor Air Quality and Mold Testing Services
    • EIFS & Moisture Analysis
    • Stucco & Building Envelope Inspection
    • Water Intrusion Investigation
    • Thermal Infrared Camera Inspection
    • Mold Remediation Services
  • Our Inspectors
  • View Sample Reports
  • Schedule/Contact US NOW
EIFS (Synthetic Stucco) Water and Moisture Testing service
Picture

EIFS (Synthetic Stucco) Water and Moisture Testing service

Water Infiltration Analysis:
Our Water Infiltration Analysis service provides moisture analysis of any structure with EIFS cladding. The purpose of this inspection is to find excessive moisture content in the structural cavities and framing. Using industry standard inspection techniques with Non-Invasive Moisture Scanning and our High-Resolution Thermal Infrared Camera, we can identify sources of moisture intrusion. The observations are all documented in a detailed written and photographic report.  Please note that the provision of a scope of work for remedial repairs is not the purpose of this inspection. Further investigation may be needed to determine the extent of water damage, if any, and how best to modify your home to address any moisture problems that may be indicated by this inspection.
 SCOPE OF INSPECTION: 
This is a basic, stucco inspection limited to the following: A visual examination of the condition of the stucco, exterior sealants, flashing, windows, doors, roof-to-stucco transitions, parapets, gutters, deck-to-building connections, stucco terminations and any penetrations through the stucco. Conducting of random electronic moisture scanning of the building envelope.  Preparing a report of our observations of potential problem areas and recording any high readings found. Providing detailed information on typical moisture-related problems in stucco homes to assist you in maintaining the value of your home.  
EIFS has been in use for quite some time. In the 1980s, the residential construction industry began using EIFS, and since its introduction, homeowners from across the US have reported property damage due to moisture. Homeowners in states with humid climates have been most prone to EIFS-related damages.  
Problems arise when moisture is retained between the sheathing of a house and the foam board component of the finish system. Over time, the house’s sheathing may rot, and attract termites. In addition, where there’s moisture, there’s always the potential for mold to develop. About 30 manufacturers in the U.S. make EIFS. EIFS is used in only 2 percent of the residential construction market. These systems have been applied in the United States and Canada for over 25 years and continue to grow in popularity. Currently, approximately 285 million square feet are applied annually, and the market continues to grow about 12 percent a year.
The problem is that the Styrofoam-type material does not breathe, and if it’s not properly installed—and that’s the critical issue–moisture can get trapped and cause sheathing damage. Some people would assert that even if it is properly installed, the design itself inherently causes moisture in a moist climate. 
Call RC Certified Inspections today for your EIFS Moisture Inspection at 913-764-7250.
SCHEDULE - CONTACT US NOW
Picture
Picture
Powered by Create your own unique website with customizable templates.